Router Login IP
10.0.0.1 Router Admin Login IP Address | Username | Password
10.0.0.1 is an IP Address that is generally assigned to the device through a local network that has been configured to use this particular class of IPs. There are many different broadband routers like Apple’s Airport Express, D-Link and Belkin Model of routers which mostly used 10.0.0.1 or 10.0.0.0.1 as their default gateway address.
To avoid confusion you may have to get rid of those devices of this IP. The interesting factor is that you evenly change the default gateway of certain routers to 10.0.0.1, the one reason behind 10.0.0.1 DNS assigned to a router is very easy to remember.
How to Access 10.0.0.1 or 10.0.0.0.1
Open the local internet
Browse on your system
Type the https://10.0.0.1 in the address bar
You will get the default gateway login page.
Enter the Username and password.
Generally for all Apple or D-Link routers Username is Admin and Password is Nil.
Now you will see the portal, be safe when fiddling with the settings.
What happens when 10.0.1.1 is not working: If you can’t access 10.0.1.1 then you can use the method of port mapping. Follow our steps one by one. Connect to the base station’s wireless network. If you have either Airport Extreme base station or time capsule, you can connect to their own base station using an Ethernet cable.
You might also like to read how to change your router password
If you further not connect with 10.0.1.1 what will do. If 10.0.1.1 refuses to connect then there is a high chance that the problem is with Apple’s hardware which does not obey your rules according to their particular norms and not your system in which you are accessing the default login gateway. This problem may arise with the Belkin 1 Port Modem. Then you may use Apple’s magic Airport Utility to set up the router. So that you can port forward 10.0.1.1
Click here to know more about recovering your router admin password and id thorough IP address: https://www.10-0-0-0-1.tech/