DJI Mavic Air 2

DJI Mavic Air 2 Firmware v01.00.0340 Released

What’s New on DJI Mavic Air 2 Firmware v01.00.0340 ? Added Safety Flight Mode. The aircraft avoids obstacles automatically and will not respond to commands to fly left or right. Added 4K Zoom Mode, which supports 2x digital zoom when setting to 4K 30/25/24 fps. Added 2x digital zoom when setting to 2.7K 60/50/48/30/25/24 and 4x digital zoom when setting to 1080P 60/50/48/30/25/24 in video mode. Added 4K resolution in Hyperlapse. Optimized FPV mode for the gimbal. Optimized shooting performance when flying … Read more

DJI Matrice 300 RTK

DJI M300 RTK Firmware

What’s New on the Latest DJI Matrice 300 RTK?Aircraft Firmware Fixed the issue where the RTK positioning data is difficult to converge or the convergence time is too long in some areas. Notes Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used) are updated to the latest firmware version. Download the latest firmware from the official website to the microSD card to update the ZenmuseZ30, XT S, XT2, or H20 / H20T. … Read more

DJI Mavic Air 2

Mavic Air 2 Firmware v01.00.0130

What’s New on latest Firmware? Fixed occasional issue: the video was abnormal when recorded to aircraft. Optimized Smart RTH. Overview Date: 2020.05.09 Aircraft Firmware: v01.00.0130 Remote Controller: v01.00.0108 DJI Fly App iOS: v1.1.0 DJI Fly App Android: v1.1.0 Notes: If the update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 for Mavic, and retry. You might also like to read about the latest New Mavic Air Firmware

DJI Phantom 4

Phantom 4 Multispectral Release Notes

What’s New? The minimum time interval in the “Capture at Equal Time Interval” mode can now be set to 1 s.* When the time interval is set to 1 s, a microSD card with a write speed of at least 50 MB/s is required. Added NDRE and GNDVI live views and the ability to switch between views.* Fixed the issue where the battery health rate was incorrectly displayed as 0. Fixed the issue where linking between the aircraft and remote … Read more

DJI Phantom 4

Phantom 4 RTK Firmware Released

What’s New on Phantom 4 RTK Firmware? When planning Photogrammetry, Linear Flight, Terrain Awareness, and Block Segmentation operations: Added a Metering Mode option in Camera Settings. The default is average metering as it best serves mapping applications. Added Relative Altitude in operation parameters to set the relative height between the takeoff point and the operation area. NOTE: Make sure to set the correct relative height to ensure the results contain appropriate overlap ratios. Max’s flying speed is now displayed with … Read more

Dji Mavic 2 Enterprise

New Mavic 2 Enterprise Firmware Released

DJI Released a new Mavic 2 Enterprise Firmware What’s New on Latest Firmware for Mavic 2 Enterprise? Added Panorama mode for the visual camera of the Mavic 2 Enterprise Dual. Users can now switch the flight mode to ATTI mode manually. Overview: Date: 2020.01.17 Mavic 2 Enterprise Aircraft Firmware: v01.01.0640 Mavic 2 Enterprise Dual Aircraft Firmware: v01.01.0640 Remote Controller Firmware: v01.01.0410 DJI Pilot App Android: v1.7.0 DJI Pilot App iOS: v1.1.3 Notes: If you need to update new firmware, it is recommended to use … Read more

Osmo Mobile 3

Osmo Mobile 3 Firmware Released

What’s New on Osmo Mobile 3 Firmware? Optimized detection when no mobile device is mounted. Optimized gimbal performance in FPV mode. Gimbal settings will not be saved if the battery level is less than 15% when powering off. When the shutter/record button is pressed, the gimbal will only exit from standby mode. No photo will be taken or video will start recording. Fixed some minor bugs. Overview: Released Date: 2019.12.19 Firmware: v01.00.00.60 DJI Mimo App iOS: v1.2.13 DJI Mimo App Android: v1.2.12 … Read more