Home » Blog » Technical News » Phantom 4 Multispectral Release Notes

Phantom 4 Multispectral Release Notes

What’s New?

  • The minimum time interval in the “Capture at Equal Time Interval” mode can now be set to 1 s.* When the time interval is set to 1 s, a microSD card with a write speed of at least 50 MB/s is required.
  • Added NDRE and GNDVI live views and the ability to switch between views.*
  • Fixed the issue where the battery health rate was incorrectly displayed as 0.
  • Fixed the issue where linking between the aircraft and remote controller failed in some countries or regions.
  • Fixed the issue where the remote controller could not use the firmware of the P4 Multispectral after having used a firmware for the Phantom 4 RTK (SDK) remote controller.

Notes:

  • The aircraft cannot be downgraded to v00.00.0130 after this firmware update.
  • After updating the remote controller with this firmware version, the remote controller can only be used with the P4 Multispectral aircraft.
  • Make sure that the firmware for the aircraft and remote controller is up-to-date and the firmware for the D-RTK 2 Mobile Station is v02.01.0012. Otherwise, they will not work together.
  • Using this firmware with a version of DJI Terra older than v1.2.0. is not recommended, as some functions will not work properly.

Overview

  • Date: 2020.03.26
  • Aircraft Firmware: v00.00.0134
  • Remote Controller Firmware: v00.00.0134
  • DJI GS Pro App: v2.0.10
  • DJI Assistant 2 For Phantom: v2.0.8
  • DJI Terra: v2.1.3

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

write for us
adbanner