Home » Blog » Technical News » DJI M300 RTK Firmware

DJI M300 RTK Firmware

DJI Matrice 300 RTK

What’s New on the Latest DJI Matrice 300 RTK?
Aircraft Firmware

  • Fixed the issue where the RTK positioning data is difficult to converge or the convergence time is too long in some areas.

Notes

  • Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used) are updated to the latest firmware version.
  • Download the latest firmware from the official website to the microSD card to update the ZenmuseZ30, XT S, XT2, or H20 / H20T.
  • It is required to use the DJI Pilot app built-in the remote controller, or download the app of V1.8.0R or later.

Overview:

  • Released Date: 2020.06.04
  • Aircraft Firmware: v01.00.01.09
  • Remote Controller Firmware: v01.00.01.08
  • Pilot App Android v1.8.0R
  • D-RTK 2 Mobile Station:v03.00.00.13
  • Intelligent Battery Station: v01.05.06.04
  • Intelligent Fight Battery: v01.02.05.22
  • Zenmuse H20 / H20T: v01.00.01.08
  • Zenmuse Z30: v01.00.06.10
  • Zenmuse XT2: v01.00.03.50
  • Zenmuse XT S: v01.00.00.09
  • DJI X-Port: v01.01.01.00
  • DJI Assistant 2 For Matrice: v2.0.11
  • Firmware Upgrade Method:

Aircraft / Remote Controller / D-RTK 2 Mobile Station: DJI Assistant 2
The built-in DJI Pilot app: will be updated with the Remote Controller firmware
Gimbal and Camera: microSD card
Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot app.)

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

write for us
adbanner